0800 865 4393


The InWin A1 is a very special Mini-ITX case. Now InWin has taken it to the next level with the Plus version. As such, the power output of the PSU has been increased, graphics cards can be significantly longer, and the RGB-LEDs in the transparent bottom are now individually addressable – meaning that many more effects are now possible. A remote control also comes included with the case. Additionally, two 120mm fans are installed, and these also include RGB-LED lighting.

As before, the InWin A1 Plus impresses with its range of exciting features and breathtaking effects. The RGB-packed, transparent base gives the case the appearance of floating atop a glowing cloud of RGB goodness. The tempered glass roof allows a smartphone to be placed on it and wirelessly charged by means of the integrated Qi charging station. Despite the impressive number of features packed into this tiny case, there’s still space for high-performance gaming hardware. The requisite high-end PSU comes pre-installed and delivers 650 Watts.


  • Modern design with cool features
  • Large tinted tempered glass side window
  • Transparent base with digitally addressable RGB-LED lighting
  • Integrated Qi charging station for wireless charging
  • Two pre-installed 120mm fans with RGB lighting including controller and remote
  • Space for Mini-ITX motherboards
  • Glass roof with aluminium cut-out for I/O panel
  • Pre-installed 650 Watt PSU with 80 PLUS Gold certification


Want to be notified when this product is back in stock?

Availability: Out of stock


The InWin A1 combines a modern look with some premium touches. The case is defined not just by its huge tinted, tempered glass side window, it also possesses a roof consisting of glass as well. Innovative as ever, InWin ensures users are able to remove the 3mm-thick tempered glass panels without needing tools. The top of the black case is uninterrupted by anything unnecessary or distracting, save for the stylish I/O panel, embedded in aluminium, as well as the Qi charging pad.

What also helps make the INWIN A1 look exceptional compared to the competition, is its use of transparent surfaces that are now illuminated courtesy of digitally addressable RGB-LEDs. In a darkened room, you might even be forgiven for thinking it’s levitating! When the lighting is not controlled via a 3-pin header on the motherboard, the lighting – as well as that of the fans, can be controlled via a remote control and the integrated controller.

Naturally, the black interior still holds a few surprises for users. For example, the power supply is installed in the top at the back of the case, offering 650 Watts of power and cable management is also a breeze thanks to the design. The small Mini-ITX motherboard is mounted to the left of it, allowing users to enjoy an unobstructed via of the board through the large tempered glass window. High-end gaming hardware support presents no challenge to this case, given the fact that it supports CPU coolers up to 160 mm in height and graphics cards up to 320mm long. A graphics card bracket also helps ensure that heavy graphics card don’t sag unnecessarily.

The bottom of the case supports a maximum of two 120mm fans, and these are placed on the exterior of the case so as to not conflict with the graphics card. They are embedded into the see-through section at the bottom. There is one fan at the back and on the right-hand side respectively, pre-installed directly beneath the PSU. The back fan slot can also be used for a 120mm radiator if you prefer. Two 2.5″ drives can be installed to the rear of the motherboard tray.

Technical Details (Case):

  • Dimensions: 224 x 273 x 357 mm (W x H x D)
  • Weight: approx. 7,1 kg
  • Material: Aluminium, steel, tempered glass
  • Colour: Pink (exterior), black (interior)
  • Form factor: Mini-ITX
  • Fans (supported):
    1x 120 mm (side)
    2x 120 mm (bottom)
    1x 120 mm (rear)
  • Fans (pre-installed):
    1x 120mm Sirius Loop ASL120 (side)
    1x 120mm Sirius Loop ASL120 (rear)
  • Radiator Mountings (in place of fan):
    1x max. 120mm (rear)
  • Filter: Bottom (non-removable)
  • Drive bays:
    2x 2,5″ slots
  • PSU: 1x Standard ATX12V (650 Watt, 80 PLUS Gold)
  • Expansion slots: 2
  • I/O Panel:
    2x USB 3.0
    1x HD Audio In/Out
  • Max GPU length: 320 mm
  • Max CPU cooler height: 160 mm

Technical Details (PSU):

  • Dimensions: 150 x 86 x 140 mm (W x H x D)
  • Fan: 120 mm (automatic, load-dependent control)
  • Efficiency: Ø 90 %, Max. 92 % (50 % Load), incl. 80 PLUS Gold Certification
  • Form factor: ATX12V 2.3
  • Operating life: min. 100.000 h
  • Active PFC
  • Output: 650 W
  • Ports:
    1x 20+4-Pin ATX
    1x 4+4-Pin ATX12V / EPS12V
    2x 6+2 Pin PCIe
    3x SATA

Technical Details (fan):

  • Dimensions: 120 x 25 x 120 mm (W x H x D)
  • Material: Plastic
  • Ports:
    4-Pin PWM
    3-Pin 5VDG
  • Speed: 400 – 1.800 RPM
  • Air pressure: 1,67 mm/H2O
  • Volume airflow: 84,95 m³/h
  • Noise: 27 dB(A)
  • Operating life: min. 30.000 h
  • Voltage: 12 V (fan) / 5 V (RGB-LEDs)
  • Power: 1,2 W (fan) / 1.25 W (RGB-LEDs)
  • Power: 0.1 A (fan) / 0,25 A (RGB-LEDs)
Back to Top
Product has been added to your cart